Puncture-proof performance without conventional fill weight.
EnduraLite is a lightweight polyurethane foam tyre filling technology that replaces compressed air inside pneumatic tyres. It provides puncture-proof performance for suitable off-road vehicles and equipment, eliminating the tyre deflation normally caused by punctures.
Explore the technology ↓Air out. Lightweight resilience in.
EnduraLite uses a specially formulated cellular polyurethane elastomer to fill the internal cavity of a pneumatic tyre. Once cured, the resilient material supports the tyre without compressed air, preventing puncture-related deflation. Its cellular structure enables a much lower filling density than conventional solid polyurethane tyre filling, resulting in dramatically reduced filling weight.
Final performance depends on tyre construction, filling density, vehicle loading and operating conditions.

Actual EnduraLite tyre cutaway supplied for this website. (AI enhanced.)
Why lightweight filling matters
Conventional solid polyurethane tyre filling adds considerable rotating and unsprung mass to vehicle wheels. EnduraLite's innovative cellular polyurethane formulation produces a dramatic reduction in filling weight, helping to minimise the additional loads imposed on suspension and driveline components while retaining protection against puncture-related tyre deflation.
Fill weight comparison
Illustrative figures from the supplied EnduraLite comparison chart. These are filling weights, not complete wheel weights.
| Tyre size | Example application | EnduraLite fill | Conventional fill | Reduction |
|---|---|---|---|---|
| 235/85R16 | Mine-site LandCruiser | 23.2 kg | 64.0 kg | 64% |
| 25×10-12 | ATV / UTV | 13.0 kg | 45.4 kg | 71% |
| 16×6.50-8 | Small equipment | 2.5 kg | 13.6 kg | 82% |
| 10-16.5 | Skid-steer loader | 26.3 kg | 72.6 kg | 64% |
| 185/85R16 | Light truck / specialist vehicle | 14.5 kg | 40.0 kg | 64% |
Percentages calculated from the respective EnduraLite quantities used and the corresponding amounts taken from an official conventional fill weight chart, rounded to the nearest whole percent.

One technology. Multiple wheel sizes and equivalent inflation pressures.
EnduraLite polyurethane tyre filling can be formulated at different densities to suit selected tyre sizes, vehicle loads and operating conditions. By adjusting the cellular polyurethane formulation and filling density, tyre deflection characteristics can be tailored to the intended application, providing an alternative to conventional compressed-air inflation for suitable off-road equipment.
Typical opportunities include mine-site LandCruisers, utility terrain vehicles, smaller turf equipment and specialist autonomous platforms.
Available configurations and suitability must be confirmed for each application.
Engineering and operating considerations
Higher maximum speeds may be possible under favorable conditions, but not recommended without verification. No road-use certification is implied, and Airless Tyre Technologies will not accept responsibility for any effects of misuse.
Interested in evaluating EnduraLite?
Tell us the tyre size, machine type, operating conditions and expected loads. We can discuss suitability and a potential field trial.
Request a technical discussion
EnduraLite brochure
Download our two-page brochure covering EnduraLite for underground light vehicles and utility vehicles.
Download EnduraLite brochure (PDF)